
Guaranteed Fitment
Always the correct part
have questions?
Always the correct part
We know our products
Fast & Reliable
Low loss FET based battery isolator with one input and two outputs 100 Amp max rating.
Like diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator without connecting the batteries together. So discharging the accessory battery will not result in also discharging the starter battery. This isolator allows simultaneous charging of three battery banks. In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents. When using ARGO FET Battery Isolators, there is no need to also increase the output voltage of the alternator. Some alternators require a B+ voltage at a terminal in order to start charging and this isolator has a special dedicated connection for that purpose. Battery isolators may not be the best way to go if you are designing a new system, but if you want to upgrade an existing system and don't wish to do a total rewiring job then using this Argofet low loss isolator is a practical and economical way to go
Argo FET Battery Isolator - 100AMP - 2 Batteries
Similarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to .
Low loss FET based battery isolator with one input and two outputs 100 Amp max rating.
Like diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator without connecting the batteries together. So discharging the accessory battery will not result in also discharging the starter battery. This isolator allows simultaneous charging of three battery banks. In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents. When using ARGO FET Battery Isolators, there is no need to also increase the output voltage of the alternator. Some alternators require a B+ voltage at a terminal in order to start charging and this isolator has a special dedicated connection for that purpose. Battery isolators may not be the best way to go if you are designing a new system, but if you want to upgrade an existing system and don't wish to do a total rewiring job then using this Argofet low loss isolator is a practical and economical way to go
Low loss FET based battery isolator with one input and two outputs 100 Amp max rating.
Like diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator without connecting the batteries together. So discharging the accessory battery will not result in also discharging the starter battery. This isolator allows simultaneous charging of three battery banks. In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents. When using ARGO FET Battery Isolators, there is no need to also increase the output voltage of the alternator. Some alternators require a B+ voltage at a terminal in order to start charging and this isolator has a special dedicated connection for that purpose. Battery isolators may not be the best way to go if you are designing a new system, but if you want to upgrade an existing system and don't wish to do a total rewiring job then using this Argofet low loss isolator is a practical and economical way to go
Type: | |
---|---|
Vendor: |
Victron Energy |
Weight: |
3.2 lb |
User Guide: | |
Product Brochure: | |
Product Installation: |
All returns must be authorized. Items returned prior to authorization will not be accepted. For international customers where applicable, customers must ship any returns to us freight and duty prepaid. Return freight charges for internationsl shippments will be the responsibility of the customer.
Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.
Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.
(Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)
Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.
We can ship to both US and Canada. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will charge a flat rate shipping for your items.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Not Applicable
Condition: | NA |
Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.
Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.
(Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)
Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.