close
close
click to zoom in
  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Fast & Reliable

  • US & Canada Delivery

T-H Marine ATLAS™ 14" Set Back Hydraulic Jack Plate Polished

No reviews yet Write a Review
$2,538.20
15 sold in last 3 hour
SKU:
AHJ-14V-DP
Condition:
New
5 customers are viewing this product

T-H Marine ATLAS™ 14" Set Back Hydraulic Jack Plate Polished

$2,538.20

T-H Marine ATLAS™ 14" Set Back Hydraulic Jack Plate Polished Product Description

ATLAS™ 14" Set Back Hydraulic Jack Plate Polished

Rated for engines up to 300hp or up to 625 pounds dry weight.

5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE

  • ATLAS™ is truly the best hydraulic jack plate in the world
  • ATLAS™ is factory installed by more boat manufacturers than any other plate
  • ATLAS™ is used by more professional fisherman than any other hydraulic jack plate
  • ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets
  • ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China

6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER

  • ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied
  • ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied
  • ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that
  • ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure
  • ATLAS™ was the first plate to offer a very simple actuator replacement in the field
  • ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement

"Warning"WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to .



Atlas is a new design that can meet the needs of today's high-performance outboard motors. This one-piece design with an innovative rod and groove lifting system can cope with the pressure of the heaviest and most powerful outboard motor (350hp or less) on the market today. All hydraulic devices are built into the jack, which saves the trouble of installing pumps and fuel tanks inside the beam and hydraulic hoses that cross the beam. High-tech engineering polymer rods have 6 times the wear resistance of steel and are made of self-lubricating materials. Lifting from top to bottom in 8 seconds, the installation time is only half of that of similar jacks. Handles all outboard gear, including the powerful Verado V6 motor.

Atlas is a new design that can meet the needs of today's high-performance outboard engines. This one-piece design with an innovative rod and slot lifting system can handle the pressure of the heaviest and most powerful outboard motors (350hp or less) on the market today. All hydraulic devices are built into the jack, which saves the trouble of installing pumps and fuel tanks in the beam and hydraulic hoses that cross the beam. High-tech engineering polymer rods have 6 times the wear resistance of steel and are made of self-lubricating materials. From top to bottom within 8 seconds, installation time is only half of similar jacks. Handles all outboard gears, including the powerful Verado V6 motor.









Frequently Asked Questions (FAQ) About T-H Marine ATLAS™ 14" Set Back Hydraulic Jack Plate Polished



Who is the T-H Marine Supplies?

T-H Marine produces thousands of products in many categories, including outboard motor mounts, outboard tilt and trim, access hatches, deck plates, lid locks, deck hardware, livewell aeration, plumbing fittings, battery trays, fishing rod holders, boat lights, rigging accessories, trolling motor accessories, pontoon boat parts, and general boat accessories.

How to describe T-H Marine ATLAS™ 14" Set Back Hydraulic Jack Plate Polished?

Atlas is a new design that can meet the needs of today's high-performance outboard engines. This one-piece design with an innovative rod and slot lifting system can handle the pressure of the heaviest and most powerful outboard motors (350hp or less) on the market today. All hydraulic devices are built into the jack, which saves the trouble of installing pumps and fuel tanks in the beam and hydraulic hoses that cross the beam. High-tech engineering polymer rods have 6 times the wear resistance of steel and are made of self-lubricating materials. From top to bottom within 8 seconds, installation time is only half of similar jacks. Handles all outboard gears, including the powerful Verado V6 motor.
  • The Atlas™ 14" Set Back Hydraulic Jack Plate Polished is rated for engines up to 300hp or up to 625 pounds dry weight.
  • The Atlas™ hydraulic jack plate is built with a unique design that provides the highest performance and safety standards.
  • The Atlas™ hydraulic jack plate comes with a lifetime warranty, so you can rest assured that it will last for generations to come.
  • The Atlas™ 14" Set Back Hydraulic Jack Plate Polished is made of
  • Engineered for engines up to 300hp or up to 625 pounds dry weight.
  • Polished and rated to last, with a lifetime warranty.
  • Comes with 5 reasons you should choose Atlas:
  • 1) Durable and reliable
  • 2) Innovative design and user-friendly features
  • 3) High quality materials that are guaranteed to last a lifetime
  • 4) Lifetime warranty for peace of mind
  • 5) Unbeatable price


Save $674 when you buy the T-H Marine ATLAS™ 14" Set Back Hydraulic Jack Plate Polished for only $1599 from Anchor Sailor! Same day free shipping before 3pm.

T-H Marine ATLAS™ 14" Set Back Hydraulic Jack Plate Polished Technical Specifications

Type: 

Vendor: 

T-H Marine Supplies

Canada & US Shipping
Rewards Program
Secure Shopping
30-Day Free Returns