
Guaranteed Fitment
Always the correct part
have questions?
Always the correct part
We know our products
Fast & Reliable
The latest generation 'H Series' of horizontal windlasses from Lewmar, the H2 and H3 windlasses are designed for boats from 9m (30ft) to 15m (50ft).
The contactor is integral to the deck unit. This saves valuable installation time as it reduces the number of components in the system. In addition the contactor is protected.
This has now been combined with a stylish, low profile design that takes up the minimum of valuable foredeck area.
The electro-polished stainless steel rode management system will handle both rope and chain. Dual direction operation gives total control when both raising and lowering.
Kits include: Built in dual direction contactor, circuit breaker and rocker switch gypsy for 5/16" G4 chain and 9/16-5/8" line
What size windlass would best suit your boat?
If you have a 10m (33 ft) boat, typically a 270kg (600 lb) pull windlass would be selected. The rule to crosscheck your windlass selection is to add the total weight of the chain and the weight of the anchor together. Rope is very light and does not affect the actual lifting performance of the windlass, but can be factored in. For safe cruising in all types of conditions and sea areas, Lewmar recommends that you multiply the total weight of your anchor and chain by 4. This number should be less than the maximum pull of the windlass you have selected. Should your findings be at or more than the maximum pull, select the next largest windlass. The windlass does not stow the anchor rode in the locker. Gravity stows the rode in the locker. There must be a free and clear area under the hawse pipe for the incoming rode to lie; if not the rode will jam. Your windlass is a retrieval device; the windlass retrieves the anchor and rode. A windlass is not a high load bearing device. When at anchor your rode should be secured to a cleat or other mooring point on the bow.
Lewmar H2G Windlass 12v is the latest generation of Lewmar horizontal windlasses designed for boats from 9m to 15m. It's a contactless windlass that saves installation time by integrating the contactor into the deck unit.
Lewmar is a leading manufacturer of marine equipment. The latest generation 'H Series' of horizontal windlasses, H2 and H3 windlasses, are designed for boats from 9m (30ft) to 15m (50ft).
Lewmar windlass is the next generation of windlasses. The H2 and H3 windlasses are designed for boats from 9m (30ft) to 15m (50ft). The contactor is integral to the deck unit.
Lewmar is a leading manufacturer of windlasses for boats.
Lewmar H2G Windlass 12v is the latest generation of windlasses from Lewmar. The contactor is integral to the deck unit. This windlass is designed for boats from 9m (30ft) to 15m (50ft).
The Lewmar H2 Windlass 12v is the latest in windlass technology. With a contactor built into the deck unit, it is easy to use and install. It is the perfect windlass for any boat from 9m (30ft) to 15m (50ft).
Lewmar is a leading manufacturer of windlasses and the H2G Windlass 12v is the latest in their line. This windlass is designed for boats from 9-15 meters and has a contactor that is integral to the deck unit. This makes it easier to install and use.
Do you have a boat? If so, it's time you installed a Lewmar H2G windlass. This windlass is the perfect size for boats 9 meters to 15 meters. You'll be able to raise and lower your anchor with ease.
Lewmar has a new line of windlasses that are designed for boats from 9m to 15m. The contactor is integral to the deck unit which means you have a smaller, more compact windlass that is easier to install. The H2G model also has an optional remote control for even greater convenience
Lewmar is a leading manufacturer of windlasses and this latest generation is no exception. The Lewmar H2G Windlass is designed for boats from 9m (30ft) to 15m (50ft). The contactor is integral to the deck unit for a sleek, slim design.
Lewmar is proud to introduce the H2 and H3 windlasses, the latest generation of horizontal windlasses. These windlasses are designed for boats from 9m (30ft) to 15m (50ft), and the contactor is integral to the deck unit. A contactor is an important part of any wind
Type: | |
---|---|
Vendor: |
Lewmar |
Weight: |
15.0 lb |
All returns must be authorized. Items returned prior to authorization will not be accepted. For international customers where applicable, customers must ship any returns to us freight and duty prepaid. Return freight charges for internationsl shippments will be the responsibility of the customer.
Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.
Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.
(Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)
Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.
We can ship to both US and Canada. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will charge a flat rate shipping for your items.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Not Applicable
Condition: | NA |
Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.
Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.
(Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)
Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.