Furuno DFF3D Multi-Beam Sonar f/NavNet TZtouch & TZtouch2 Product Description
DFF3D Multi-Beam Sonar for NavNet TZtouch & TZtouch2
Turn your NavNet TZtouch or TZtouch2 MFD into a multi-beam sonar that can see 120-degrees port to starboard, allowing you to see the depth and direction fish schools are moving, while displaying the seabed condition in real time. The DFF3D gives you real-time 120 port-starboard view of the water column and seabed in over 650 feet. The DFF3D allows you to explore fishing spots and find fish in deep water far faster than conventional single beam sounders. The main beam penetrates right under the boat at a depth of over 1,000 feet, depending on water conditions. Installation is made easy thanks to a compact transducer design. The built-in motion sensor in the transducer stabilizes the display to give clear and stable images, even under rough sea conditions.
Cross-Section displays the real-time sea column echo in 120 degrees port and starboard. This mode aids in instantly understanding the distribution of bait fish and water column conditions.
The 3D Sounder History provides an intuitive and easy-to-understand 3D image of the seafloor, along with fish school icons. This mode is useful in a variety of situations, such as selecting fishing hotspots and assessing the seabed condition.
A single (directly under the boat) or triple-direction (middle, left and right) fish finder image can be displayed. The triple beam display helps to understand the depth of fish targets and the seabed condition in each direction, as well as the direction target fish are moving. Each beam angle and beam width are selectable.
Side scan clearly displays the shape of structure as a high definition image in port and starboard direction. It is suitable for searching the seabed and understanding sea floor structure.
Features:
- Sidebar detection range is over 650 ft (200 m) in a 120-degree swath port and starboard direction
- Deep water, main beam penetration directly under the boat is over 1,000 ft. (350 m), depending on water conditions
- Rich set of menus in each display mode
- The built-in motion sensor (standard supply) stabilizes the display to give clear and stable images even under rough sea conditions
- Thru-hull or Transom mount transducers available
- Customize the display according to your needs - Depending on the situation and preference, a combination of screen modes can be displayed
Furuno DFF3D sonar module model: DFF3D turns NavNet TZtouch or TZtouch2 MFD into a multi-beam sonar. You can see the port side and the starboard side at 120 degrees, you can see the depth and direction of the fish movement, as well as the real-time display of the seabed condition. time. The new DFF3D allows you to observe the 120th water column on the seabed and the port and starboard sides in real time from above 650 feet. Using DFF3D, you can explore fishing spots and find fish in deep water faster than traditional single beam echo sounders. Depending on the water conditions, the high beam will penetrate more than 1,000 feet directly below the ship. The compact transducer design makes installation easy. The built-in motion sensor in the sensor can display stably even in harsh sea conditions to provide clear and stable images. The cross section shows real-time sea pillar echoes at 120 degrees port and starboard. This mode helps to immediately understand the distribution of bait fish and water column conditions. The 3D Sounder history record provides intuitive and easy-to-understand 3D images of the ocean floor, as well as fish icons. This mode is useful in many situations, such as selecting fishing hotspots and evaluating seabed conditions. A single (directly under the boat) or three directions (middle, left and right) fishfinder images can be displayed. The three-beam display helps to understand the depth of the target fish and the condition of the seabed in each direction, as well as the direction of the target fish's movement. Each beam angle and beam width are optional. The side scan clearly shows the shape of the structure, such as high-definition images in the port and starboard directions. It is suitable for searching the seabed and understanding the structure of the seabed.
Frequently Asked Questions (FAQ) About Furuno DFF3D Multi-Beam Sonar f/NavNet TZtouch & TZtouch2
Who is the Furuno?
Furuno is a world-renowned manufacturer and leader of marine electronics that produces an abundance of products. With a large selection of high-end, commercial grade sonar to the compact Black Box sonar, Furuno has one to fit almost any vessel. When it comes to communications, top performance and total reliability are necessities. That's why Furuno radio equipment is tough and dependable.
How to describe Furuno DFF3D Multi-Beam Sonar f/NavNet TZtouch & TZtouch2?
Furuno DFF3D sonar module model: DFF3D turns NavNet TZtouch or TZtouch2 MFD into a multi-beam sonar. You can see the port side and the starboard side at 120 degrees, you can see the depth and direction of the fish movement, as well as the real-time display of the seabed condition. time. The new DFF3D allows you to observe the 120th water column on the seabed and the port and starboard sides in real time from above 650 feet. Using DFF3D, you can explore fishing spots and find fish in deep water faster than traditional single beam echo sounders. Depending on the water conditions, the high beam will penetrate more than 1,000 feet directly below the ship. The compact transducer design makes installation easy. The built-in motion sensor in the sensor can display stably even in harsh sea conditions to provide clear and stable images. The cross section shows real-time sea pillar echoes at 120 degrees port and starboard. This mode helps to immediately understand the distribution of bait fish and water column conditions. The 3D Sounder history record provides intuitive and easy-to-understand 3D images of the ocean floor, as well as fish icons. This mode is useful in many situations, such as selecting fishing hotspots and evaluating seabed conditions. A single (directly under the boat) or three directions (middle, left and right) fishfinder images can be displayed. The three-beam display helps to understand the depth of the target fish and the condition of the seabed in each direction, as well as the direction of the target fish's movement. Each beam angle and beam width are optional. The side scan clearly shows the shape of the structure, such as high-definition images in the port and starboard directions. It is suitable for searching the seabed and understanding the structure of the seabed.
- You can use your NavNet TZtouch or TZtouch2 MFD as a multi-beam sonar which can see 120-degrees port to starboard.
- With this, you are able to see the depth and direction of fish schools, allowing you to get more accurate readings on the location of your catch.
- This is especially useful for fishing in areas where there are many obstacles that may obstruct your view.
- DFF3D Multi-Beam Sonar for NavNet TZtouch & TZtouch2
- Get your NavNet TZtouch or TZtouch2 MFD to show a 120 degree view of the water
- Instantly see what fish are moving and where they're going
The Furuno DFF3D Sonar Module is a 3-beam, multi-frequency sonar module. It is an ideal choice for those looking for a high performance sonar module with side scan and depth capabilities.
Buy with the best price
Furuno DFF3D Multi-Beam Sonar f/NavNet TZtouch & TZtouch2 for only
$1995 from NVN Marine! Same day fast and free shipping before 3pm.
Furuno DFF3D Multi-Beam Sonar f/NavNet TZtouch & TZtouch2 Technical Specifications
| Type: |
|
| Vendor: |
Furuno
|
| Weight: |
12.2 lb
|
| Product Manual: |
|
| Product Brochure: |
|
Canadian Dollars
