close
close
click to zoom in
  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Fast & Reliable

  • US & Canada Delivery

Blue Sea 3001 HD-Series Battery Switch Single Circuit ON/OFF w/AFD

No reviews yet Write a Review
$87.44
SKU:
3001
UPC:
632085030018
Condition:
New
5 customers are viewing this product

Blue Sea 3001 HD-Series Battery Switch Single Circuit ON/OFF w/AFD

$87.44

Blue Sea 3001 HD-Series Battery Switch Single Circuit ON/OFF w/AFD Product Description

Battery switches isolate the potentially destructive energy in the battery banks when the boat is not in use or during emergencies. Switches isolated battery banks to all loads or combines battery banks to all loads.

Blue Sea 3001BSS Attributes

  • Type: Key
  • Activation Type: Manual
  • Continuous Ampere Rating (A): 600 Amp
  • Base Diameter (IN): 3-5/8 Inch
  • Installation Type: Bolt-On

Blue Sea 3001BSS Features & Benefits

  • Make-Before-Break Contact Design Allows Switching Between Battery Banks Without Power Interruption
  • Accepts Two 4/0 AWG Battery Cables
  • Tin-Plated Copper Studs For Maximum Conductivity And Corrosion Resistance
  • Tactile Indicator Conveys Knob Position By Feel
  • Waterproof – Rated IP66 From Water Projected In Powerful Jets
  • Case Design Allows Surface, Rear, Or Front Panel Mounting Options
  • Ignition Protected—safe For Installation Aboard Gasoline Powered Boats
  • Limited 2 Year Warranty

Blue Sea 3001BSS Installation Instructions

Blue Sea 3001BSS Technical Bulletins


3001 HD-Series Battery Switch Single Circuit ON/OFF with AFD

Features:

  • 600 Ampere Continuous Rating
  • Accepts two 4/0 battery cables per terminal
  • Ignition protected - safe for installation aboard gasoline powered boats
  • .870" (22.01mm) stud length to accept multiple cable terminals
  • 1/2" (M12) Tin-plated copper studs for maximum conductivity and corrosion resistance
  • Meets American Boat and Yacht Council (ABYC) requirements for battery switches
  • Tactile textures indicate knob position by feel only
  • Case design allows surface or rear panel mounting
  • Fits all Perko and Guest low amperage battery switch hole patterns

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to .



These Blue Sea Systems heavy-duty single-circuit battery switches can provide 600 amps of current for large diesel engines. These switches can switch a single battery to a single load group and have tinned copper studs for maximum conductivity and corrosion resistance. Accepts up to 4/0 AWG battery cables. The stud accepts 1/2" (M12) ring terminals and has a 7/8" stud length (22mm) that can accommodate multiple cable terminals. Blue Sea Systems' one-piece terminal design will not loosen over time. One-piece stainless steel flange nuts ensure a safe and reliable connection. Suitable for most Perko and Guest low-current battery switch hole patterns. The housing design allows surface or rear panel mounting options. The tactile indicator communicates the position of the knob through tactile sensation. The 5442 includes the AC generator excitation isolation switch (AFD). When the engine is running, if the switch is switched to the OFF position, the diode in the alternator can be protected. If you do not use AFD to protect the alternator, you can connect an LED to the AFD terminal to indicate when the battery switch is in any position other than OFF.













Frequently Asked Questions (FAQ) About Blue Sea 3001 HD-Series Battery Switch Single Circuit ON/OFF w/AFD







Who is the Blue Sea Systems?

Blue Sea Systems is committed to the improvement of marine electrical products and systems, such as panel systems, circuit breakers, connectors, and insulators. Blue Sea wants to satisfy their distributors, dealers and ultimately the retail customer by designing and manufacturing electrical products engineered to withstand the harsh marine environment.

How to describe Blue Sea 3001 HD-Series Battery Switch Single Circuit ON/OFF w/AFD?

These Blue Sea Systems heavy-duty single-circuit battery switches can provide 600 amps of current for large diesel engines. These switches can switch a single battery to a single load group and have tinned copper studs for maximum conductivity and corrosion resistance. Accepts up to 4/0 AWG battery cables. The stud accepts 1/2" (M12) ring terminals and has a 7/8" stud length (22mm) that can accommodate multiple cable terminals. Blue Sea Systems' one-piece terminal design will not loosen over time. One-piece stainless steel flange nuts ensure a safe and reliable connection. Suitable for most Perko and Guest low-current battery switch hole patterns. The housing design allows surface or rear panel mounting options. The tactile indicator communicates the position of the knob through tactile sensation. The 5442 includes the AC generator excitation isolation switch (AFD). When the engine is running, if the switch is switched to the OFF position, the diode in the alternator can be protected. If you do not use AFD to protect the alternator, you can connect an LED to the AFD terminal to indicate when the battery switch is in any position other than OFF.

What is the type of the product?

ON-OFF w/AFD

Which positions are exists in this product?

2

What is the weight of the product?

0.4

Is this switch has alternator field disconnect option?

Yes


Save $71 when you buy the Blue Sea 3001 HD-Series Battery Switch Single Circuit ON/OFF w/AFD for only $79 from NVN Marine! Same day shipping before 3pm.

Blue Sea 3001 HD-Series Battery Switch Single Circuit ON/OFF w/AFD Technical Specifications

Type: 

Vendor: 

Blue Sea Systems

Weight: 

1.3 lb

Positions: 

2

AFD: 

Yes

Continuous Amperage: 

900a

Product Manual: 

Shipping & Return
Returns Policy

All returns must be authorized. Items returned prior to authorization will not be accepted. For international customers where applicable, customers must ship any returns to us freight and duty prepaid. Return freight charges for internationsl shippments will be the responsibility of the customer.

Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.

Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.

(Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)

Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.

Shipping

We can ship to both US and Canada. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will charge a flat rate shipping for your items.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

Not Applicable

Condition: NA

Frequently Asked Questions

  • How do I request a quote?
    To request a quote for pricing on any item found on our site, please click on our "REQUEST A QUOTE" link. Fill out and submit the form, one of our representatives will contact you when the quote is ready.
  • What payment options do I have?
    EquipTestPro accepts a variety of payment options for your convenience. For prepayment, we accept all major credit cards (MasterCard, Visa, Amex, Discover), Purchase Orders, and wire transfers.
  • How do I retturn items?
    All returns must be authorized. Items returned prior to authorization will not be accepted. For international customers where applicable, customers must ship any returns to us freight and duty prepaid. Return freight charges for internationsl shippments will be the responsibility of the customer.

    Defective new equipment may be returned for warrantyrepair/exchange to us within (5) days of the shipment receipt date. After five (5) days, returns will be handled by direct contact and in accordance with the warranty terms of the item's manufacturer. Items that have malfunctioned due to mishandling, electrical overload, etc., will be subject to repair charge.

    Non defective new equipment will be authorized for return within five (5) days of the shipment receipt date if the equipment is still in new, re-sellable condition with the original manual(s), accessories, packing material and carton. We reserve the right to reject returnsin which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 25% of purchase price may apply. Special orders and dangerous goods are non-returnable.

    (Do not write anytingon the manufacturer's original package or use as a shipping carton. Include all accessories, manuals and warranties.)

    Please, include a copy of the packing list or invoice with a reason for the return. Your return authorization number is valid for thirty (30) days.

Canada & US Shipping
Rewards Program
Secure Shopping
30-Day Free Returns